15Magneti ad anello svasato N35 al neodimio per terre rare mmx3 mm con foro svasato per #4 Vite (20 pacco)
MAGNET SPECIFICATIONS
Taglia : 15mm x 5mm thick with countersunk hole for #4 vite(Outer Diameter x Thickness)
Metric Dimensioni : 15 X 5 mm
Svasata Dimensione foro : 4mm
Dimensioni vite : #4
Grado : N35
Pull Forza : 6.7 lbs
Rivestimento : Nichel-Rame-Nichel (Ni-Cu-Ni)
Magnetizzazione : assialmente – Paio
Materiale : neodimio (NdFeB)
Tolleranza : +/- 0.1mm
Temperatura max esercizio : 176 F
Quantity Included : 20 svasata Anelli
Countersunk neodymium disc magnets can be fastened with a countersunk head screw. They are only 4 mm thick and therefore very discreet for hanging up signs, tools, eccetera. Especially suitable for cabinetmaking, kitchen installations, booth and store construction, signage technology, eccetera.
Strong countersunk ring magnets sized for flat-head screws. The south pole is on the side of the magnet with the large hole, in cui la testa della vite sarebbe.
Questi anelli svasata possono essere utilizzati per una vasta gamma di applicazioni compreso chiusure delle porte e porta utensili.
notare che: Neodymium magnets are brittle and can break under excessive application of force. Not all holding surfaces are level, which is why magnets need a little slack. This allows them to optimally align with the ferromagnetic object and extend the highest adhesive force. That is why we recommend fastening these magnets by hand.
Recensioni
Non ci sono ancora recensioni.